10pcs/kit Dental External Oral Trimming&Polishing Kit for Enamic HP1310D Item NO.: 10703648

POLISHING KIT FOR ENAMIC Order No: HP 1310 D Packing:10 pcs/kit Item No.: TH 2013,RD 2133A,RD2373A,RD2423A,RD2134A,RD 2374A, RD 2424A,RD 2137B, RD 2377B, RD 2427B Introduction Characteristic: Fast grinding, long service life, low heat production, good polishing effect. Steps: 1) Carbide burs are used for leveling the connection channel between the teeth and porcelain. (Note: Elastic ceramics contain resin component, do not choose other grinding burs ) (Recommend R.P.M20000-25000/Min) 2)Grey polishers are used for leveling the surface of the crown.(Recommend R.P.M10000-15000/Min) 3) Dark pink polishers are used for pre-polishing.(Recommend R.P.M 8000-12000/Min) 4) Greyish-white polishers are used for high gloss polishing(Recommend R.P.M6000-10000/Min) Effect: 1) The sharpness of carbide burs can leveling the connection channel between the teeth and porcelain quickly. 2) Low heat production can avoid the damage of restoration because of overheating. 3) By adjusting the rotating speed and pressure of dark pink polisher, achieving leveling and polishing effect. 4) Shorten the operating time beside the chair and immediately achieving the same high gloss polishing effect as after the glaze. Caution: Please Control the pressure and rotate speed when grinding the connection channel between teeth and porcelain to avoid the damage of restoration. Pre-polishing is the base of high gloss polishing. So Pre-polishing is indispensable.