12pcs/kit Dental Oral kit For trimming & Polishing Enamic RA1312D Item NO.: 10703634

POLISHING KIT FOR ENAMIC Order No: RA 1312 D Packing:12 pcs/kit Item No: RD3113A,RD3143A,RD3203A,RD3413A.RD3114A.RD3144A. RD 3414A,RD3204A,RD3117B,RD3147B,RD 3417B,RD 3207B Introduction Characteristic: Fast grinding, long service life, low heat,production, good polishing effect, Steps: 1) Grey polishers are used for grinding the Maxillofacial. (Recommend R.P.M10000-12000/Min) 2)Deep pink polishers are used for pre-polishing. (Recommend R.P.M 8000-10000/Min) 3) Greyish-white polishers are used for high gloss polishing. (Recommend R.P.M6000-8000/Min) Effect: 1) Low heat production can avoid the damage to restoration because of overheating. 2)By adjusting the rotate speed and pressure of deep pink polisher,achieving smoothing and polishing effect. 3) Shorten the operating time beside the chair and immediately achieving the same high gloss polishing effect as after the glaze. Caution: Control the pressure and rotate speed when grinding the connection channel between teeth and porcelain to avoid the damage of restoration. Pre-polishing is the base of high gloss polishing. So Pre-polishing is indispensable.