16pcs/kit Dental Clinic kit of Anterior and posterior Teeth preparation FG1816G Item NO.: 10703661

1. G/BR-32C: 1.6mm depth of 0.8mm depth of cut edge, neck edge, lip surface, tongue side depth of cut edge (tongue protuberance preserved) after pointed positioning, the crown surface depth of 1.6mm point is connected, the tongue cheek surface depth is 0.8mm, the plane above the needle ball is level with the teeth, and after depth of cut, it is connected. 2. G/TR-39C: Quickly remove teeth. 3. G/SO-20: Used for preparing adjacent surfaces of anterior teeth and creating gaps. 4. G/TC-34F: Preparation of adjacent slotted blade edges. 5. G/SR-26: Used for the preparation of 1.0mm shoulder width and grinding amount on the labial and lingual surfaces of anterior teeth. 6. G/WR-14: Remove excess teeth from the tread. 7. G/TR-81F: Used for the refinement of the lingual fossa after anterior tooth depth fixation. 8. G/TR-D23C: Grind off excess teeth on the buccal and lingual surfaces in the mesial direction. 9. G/SR-41: Preparation of posterior buccal shoulder. 10. G/SO-31: Operate from the lingual side to the buccal side to open the adjacent surface. 11. G/TR-13F: Pull the needle for adjacent positioning slot operation. (Red label to avoid accidental damage to adjacent teeth) 12. G/TR-33F: Lip and shoulder polishing at 120000 to 160000 revolutions per minute for adjacent shoulder preparation, with gingival alignment from the lingual side to the buccal side. 13.G/TR-D08F: Shoulder trimming removal at 40000 revolutions and shoulder polishing at 80000 revolutions. 14. G/EX-08F: Used for anterior tooth cutting angle and posterior tooth surface correction with 40000 to 80000 rotations. 15.RF3144A: Polishing the inspection groove at 10000-20000 revolutions per minute. 16. RF3034A: Lip and tongue cutting edge polishing (excluding shoulder platform) 10000-20000 rpm 1:1 low-speed mobile phone cheek and tongue polishing 10000-20000 rpm.