USD
Home>35910>Dental LED Curing Light iLED Style, Purple, 1s Fast Curing Cordless Cure Lamp
Dental LED Curing Light iLED Style, Purple, 1s Fast Curing Cordless Cure Lamp

Dental LED Curing Light iLED Style, Purple, 1s Fast Curing Cordless Cure Lamp Item NO.: 10303052

Write a Review
US$ 179.98
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name Dental LED Curing Light iLED Style, Purple, 1s Fast Curing Cordless Cure Lamp
Item NO. 10303052
Weight 0.3 kg = 0.6614 lb = 10.5822 oz
Category 35910
Creation Time 2026-11-06

Woodpecker Dental iLED Max Curing Light, 1 Sec Fast Cure Resin Lamp, 2600mW/cm², Purple

Metal Head, Long Service Life

Note: If you receive our Vakker 1-second curing light with charging defects, please contact us. We will send a replacement unit and cover the return shipping cost. Please rest assured about our after-sales service. We strive to offer our best support. Should you have any questions, feel free to reach out, and we will respond promptly.

Dimensions: 25mm × 240mm
Power Supply: Rechargeable Lithium Battery
Battery Model: JW-Y-14
Battery Spec: 3.7V / 1400mAh
Built-in battery protection against overvoltage, overcurrent and short circuit.

Adapter
Power Input: 100V–240V, 50Hz/60Hz
Input Power: 10VA
Power Output: DC 5V / 1A

Light Source
5W High-power Blue LED
Inspection Method: The LED works normally if light emits under proper operation.
Wavelength matches clinical dental resin curing materials, compatible with 3M, Dentsply and other resin brands.
Wavelength: 450nm–455nm
Light Intensity: 1000–2600mW/cm²

Working Conditions
Ambient Temperature: +5℃ ~ +40℃
Relative Humidity: 30%–75%
Atmospheric Pressure: 70kPa ~ 106kPa

Equipment Safety
Operation Mode: Intermittent operation
Protection Against Electric Shock: Class I / Type B
Ingress Protection: Ordinary equipment (IPX0)
Not suitable for use in the presence of flammable anesthetic mixtures with air, oxygen or nitrous oxide.

Installation & Disassembly
The head can be rotated 360° left and right.
When charging is required: Plug the adapter into 100V–240V AC mains. Connect the adapter’s output plug to the pedestal DC 5.0V input, then place the handpiece onto the charging pedestal.

Operation Instructions
Press the mode button to switch between the two available modes:

1. TURBO Mode: Display shows P1. Press timer button to select 1s or 3s curing time.
2. Normal Mode: Display shows P2. Press timer button to select 5s,10s,15s,25s or 30s curing time.

Warranty
2-year warranty for main unit
1-year warranty for battery

FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If applicable, you may purchase this item only if you are an authorized purchaser. If regulated by FDA, we will verify your authorized purchaser status prior to shipment.

No related record found