Dental Preshaded Prime High Transplucency (HT) Zirconia Block 16 Shades 98X20 Item NO.: 10703841

Prime HT zirconia improves the translucency of 3Y zirconia, which also has good strength. 
HT zirconia could be used to make full contour restoration for both anterior and posterior areas.


Specification:
Flexural strength:1200Mpa
Translucency:43%
Density After Sintering:≥6.0g/mm³
Solubility After Sintering:<100μg/cm²
CTE(20-500℃):(10.5±0.1)*10-6K-1

Scope of Application
Permanent anterior and posterior crowns
Permanent anterior and posterior bridges
Implant-supported crowns and bridges
Full arch implant prostheses

Advantages
High strength with attractive translucency
Reproduce shades perfectly
Made from high-quality and cost-efficient raw materials
Avaliable shades：VITA 16 shades A-D+ White

Open System
PART NUMBER SIZE MODEL
D98－10 Φ98x10mm HS/HT/AT/MHT/GM
D98－12 Ф98x12mm HS/HT/AT/MHT/GM
D98－14 Ф98x14mm HS/HT/AT/MHT/GM
D98－16 Φ98x16 mm HS/HT/AT/MHT/GM
D98－18 Φ98x18mm HS/HT/AT/MHT/GM
D98－20 Φ98x20mm HS/HT/AT/MHT/GM
D98－22 Φ98x22mm HS/HT/AT/MHT/GM
D98－25 Φ98x25mm HS/HT/AT/MHT/GM

Amann Girrbach System
PART NUMBER SIZE MODEL
89-71-10 89x71×10 HS/HT/AT/MHT/GM
89-71-12 89x71x12 HS/HT/AT/MHT/GM
89-71-14 89x71x14 HS/HT/AT/MHT/GM
89-71-16 89x71x16 HS/HT/AT/MHT/GM
89-71-18 89x71x18 HS/HT/AT/MHT/GM
89-71-20 89x71×20 HS/HT/AT/MHT/GM
89-71-22 89x71x22 HS/HT/AT/MHT/GM
89-71-25 89x71×25 HS/HT/AT/MHT/GM
Zirkon Zahn System
PART NUMBER SIZE MODEL
D95－10 Φ95×10 mm HS/HT/AT/MHT/GM
D95－12 Φ95x12 mm HS/HT/AT/MHT/GM
D95－14 Φ95x14 mm HS/HT/AT/MHT/GM
D95－16 Φ95x16 mm HS/HT/AT/MHT/GM
D95－18 Φ95×18 mm HS/HT/AT/MHT/GM
D95－20 Φ95×20 mm HS/HT/AT/MHT/GM
D95－25 Φ95×25 mm HS/HT/AT/MHT/GM