Dental Prime Gradient Multilayer (GM-3D) Zirconia Block 20 Shade 98x25 Item NO.: 10704321

Prime GM-3D products combines 4Y and 5Y zirconia, providing good toughness, natural transition and excellent translucency. The GM zirconia could satisfy most of the demands in dental restorations.

Specification:
Flexural strength:700Mpa-1060Mpa
Translucency:43%-57%
Density After Sintering:≥6.03g/mm³
Solubility After Sintering:<100μg/cm²
CTE(20-500℃):(10.5±0.1)*10-6K-1

Scope of Application
Permanent anterior and posterior crowns
Permanent anterior and posterior bridges
Implant-supported crowns and bridges

Advantages
Natural transitions in 3 dimensions: shade, translucency and strength
Made from high-quality and cost-efficient raw materials
Avaliable shades：VITA 16 shades A-D + BL1 BL2 BL3 BL4

Open System
PART NUMBER SIZE MODEL
D98－10 Φ98x10mm HS/HT/AT/MHT/GM
D98－12 Ф98x12mm HS/HT/AT/MHT/GM
D98－14 Ф98x14mm HS/HT/AT/MHT/GM
D98－16 Φ98x16 mm HS/HT/AT/MHT/GM
D98－18 Φ98x18mm HS/HT/AT/MHT/GM
D98－20 Φ98x20mm HS/HT/AT/MHT/GM
D98－22 Φ98x22mm HS/HT/AT/MHT/GM
D98－25 Φ98x25mm HS/HT/AT/MHT/GM

Amann Girrbach System
PART NUMBER SIZE MODEL
89-71-10 89x71×10 HS/HT/AT/MHT/GM
89-71-12 89x71x12 HS/HT/AT/MHT/GM
89-71-14 89x71x14 HS/HT/AT/MHT/GM
89-71-16 89x71x16 HS/HT/AT/MHT/GM
89-71-18 89x71x18 HS/HT/AT/MHT/GM
89-71-20 89x71×20 HS/HT/AT/MHT/GM
89-71-22 89x71x22 HS/HT/AT/MHT/GM
89-71-25 89x71×25 HS/HT/AT/MHT/GM
Zirkon Zahn System
PART NUMBER SIZE MODEL
D95－10 Φ95×10 mm HS/HT/AT/MHT/GM
D95－12 Φ95x12 mm HS/HT/AT/MHT/GM
D95－14 Φ95x14 mm HS/HT/AT/MHT/GM
D95－16 Φ95x16 mm HS/HT/AT/MHT/GM
D95－18 Φ95×18 mm HS/HT/AT/MHT/GM
D95－20 Φ95×20 mm HS/HT/AT/MHT/GM
D95－25 Φ95×25 mm HS/HT/AT/MHT/GM