16pcs/kit Dental Clinic kit of Anterior and posterior Teeth preparation FG2416G Item NO.: 10703662

1. BR-31C: ISO 806 314 001 534 016 is used to develop a tooth preparation depth of 0.8mm on the buccal, lingual (palatal) side of the tooth body, as well as the depth of the neck and shoulder. 2. BR-32C: ISO 806 314 001 534 013 is used to develop a tooth preparation depth of 0.6mm for the buccal and lingual (palatal) sides of the tooth body, as well as the depth of the neck and shoulder. 3. TR-39C: ISO 806 314 197 534 019 is used for preliminary preparation of the lip surface and cutting end at a depth of 0.8-1.6mm after anterior tooth depth determination. 4. SO-20: ISO 806 314 289 524 011 is used to open the gap between adjacent front teeth after grinding the fixed depth teeth. 5. TC-34: ISO 806 314 166 524 016 is used to assist in the preparation of full crowns with misaligned teeth, adjacent to the gingival step region in the shoulder area. 6. SR-26: ISO 806 314 141 524 013 is used for the preparation of 1.0mm shoulder width and grinding amount on the anterior lip and tongue surface. 7. FO-41: ISO 806 314 257 524 017 is used for the preliminary preparation of the tongue surface at a depth of 0.8-1.6mm after anterior tooth depth determination. 8. FO-41F: ISO 806 314 257 514 015 is used to correct the preparation depth of the anterior lingual concavity and the shape of the lingual edge ridge. 9.EX-84C: ISO 806 314 108 534 014 is used to develop a depth of 1.6mm for the preparation of posterior tooth treatment surface grooves. 10. EX-85C: ISO 806 314 108 534 014 is used to develop a depth of 1.2mm for the preparation of posterior tooth surface grooves. 11. TR-D23C: ISO 806 314 197 534 017 is used for the preliminary preparation of cheeks, tongue (palate), and face depths of 0.8-1.6mm after posterior tooth depth determination. 12. SR-41: ISO 806 314 139 524 013 is used for the preparation of 1.0mm shoulder width and grinding amount on the buccal and lingual (palatal) surfaces of posterior teeth. 13. TR-33F: ISO 806 314 198 514 016 is used for correcting the preparation depth of posterior tooth treatment surfaces, removal of functional sharp and short slopes, removal of burrs on adjacent shoulder surfaces, polishing, and correction of polymerization degree. 14. TB1560: ISO 500 314 198 072 014 is used to remove the burrs on the buccal, lingual (palatal) surface shoulder and polish the shoulder and treatment surface morphology after preparation. 15. SH3414: ISO 658 204 304 514 100 is used for polishing the shoulder and adjacent surfaces near and far. SH3204: ISO 658 204 030 514 060 is used for polishing the surface morphology of posterior teeth.